Free

CRI Guide

Understanding Color Rendering Index and why it matters for your lighting.

1Select Your Space

2CRI Recommendation

Important Priority

Minimum CRI

90

Ideal CRI

95+

Why this matters:

Accurate food colors for safe preparation

CRI Quality Scale

95-100Excellent
90-95Very Good
80-90Good
70-80Fair
< 70Poor

Shopping Tip

Look for "CRI" or "Ra" on LED packaging. If it is not listed, you cannot tell from the box; check the datasheet or ask the seller. Products that reach 90+ or 95+ CRI usually say so on the packaging.

How to use this guide

  1. Pick a category and a room. The guide shows a minimum CRI, an ideal CRI and why it matters there.
  2. Compare with the CRI (Ra) printed on the bulb or fixture datasheet.
  3. For colour-critical rooms, also check R9 (saturated red), which Ra does not include.
  4. When two products list the same CRI, compare R9 or the TM-30 fidelity (Rf) and gamut (Rg) values if the datasheet gives them, and view the lamps side by side on the actual materials if you can.

What is the Color Rendering Index (CRI)?

CRI describes how faithfully a light source shows the colours of objects compared with a reference light of the same colour temperature, on a scale that tops out at 100. The general index, Ra, is the average of eight test colour samples, R1 to R8.

How is CRI measured?

The spectrum of the lamp is used to calculate how each test colour sample would look under it and under the reference source (CIE 13.3). The colour shift for each sample gives a special index (R1 to R14 in CIE 13.3; many datasheets also list an R15 added later), and Ra is the mean of the first eight. Saturated red (R9) is not part of Ra, which is why two lamps with the same CRI can show reds very differently.

What CRI is good enough?

It depends on the room. This guide uses a minimum of 80 for a living room and 90 for a kitchen, and asks for more where colour decisions are made. These are this guide's planning targets, not requirements from a standard; the full list is in the table below.

Is CRI the same as colour temperature?

No. Colour temperature (in kelvin) says whether the light looks warm or cool; CRI says how accurately it shows colours. A 2700 K lamp and a 5000 K lamp can both be CRI 90.

Worked example: two lamps with the same CRI and very different reds

Computed by this calculator's own code (method v1.1.0) when this page was built on 2026-11-20.

Inputs
Lamp A, R1 to R8 (hypothetical)92, 93, 90, 89, 91, 90, 88, 87
Lamp A, R9 (hypothetical)62
Lamp B, R1 to R8 (hypothetical)96, 95, 88, 90, 92, 89, 86, 84
Lamp B, R9 (hypothetical)18
Results
Lamp A: Ra = mean of R1 to R890.0
Lamp B: Ra = mean of R1 to R890.0
Printed on both boxesCRI 90
R9 (not part of Ra)62 vs 18

The R values are made up for this illustration and are not measurements of any product. They show that Ra is only an average of eight pastel test colours: both lamps round to the same CRI, yet lamp B would render saturated reds (skin tones, meat, red fabrics) much less faithfully. This is why step 3 above says to check R9 on the datasheet for colour-critical rooms; the selector itself only shows CRI targets.

All rooms in this guide

CategoryRoomMinimum CRIIdeal CRIPriority
HomeLiving Room8090+Moderate
HomeKitchen9095+Important
HomeBathroom9095+Critical
HomeBedroom8090+Moderate
HomeHome Office8590+Important
HomeCloset/Wardrobe9095+Important
Retail / commercialClothing Store9095+Critical
Retail / commercialJewelry Store9597+Critical
Retail / commercialGrocery/Food9095+Critical
Retail / commercialElectronics8085+Moderate
Retail / commercialFurniture Store9095+Important
HospitalityRestaurant Dining9095+Critical
HospitalityHotel Lobby8590+Important
HospitalityHotel Room8590+Moderate
HospitalityBar/Lounge8085+Moderate
HospitalitySpa/Wellness8590+Important
HealthcareOperating Room9597+Critical
HealthcareExamination Room9095+Critical
HealthcareDental Office9597+Critical
HealthcarePatient Room8590+Important
HealthcarePharmacy9095+Important
Art and displayArt Gallery9597+Critical
Art and displayMuseum9597+Critical
Art and displayPhotography Studio9597+Critical
Art and displayPrint Shop9597+Critical
Art and displayDesign Studio9095+Important

Planning guidance used by this site, not requirements from a building code or standard. The same values drive the selector above.

Assumptions and limits

  • The minimum and ideal values are planning guidance used by this site, not requirements from a building code or standard.
  • CRI is one number from eight test colours. Two lamps with the same CRI can still look different.

Sources

  • CIE 13.3, Method of measuring and specifying colour rendering properties of light sources (definition of Ra).